Installing Updates For The Home Connect Software - Siemens KG N Series User Manual

Deactivating the cameras:
Press the "alarm" button.
1.
The refrigerator compartment
temperature display shows Cn.
Press refrigerator compartment
2.
select button.
Keep pressing + button until the
3.
refrigerator compartment
temperature display shows CA and
the freezer compartment
temperature display shows On.
Press freezer compartment select
4.
button.
Press the + button.
5.
The freezer compartment
temperature display shows OF.
The cameras are deactivated.
Resetting Home Connect settings
If there is a problem when trying to
establish a connection or if you would
like to register the appliance in a
different home network (WLAN), the
Home Connect settings can be reset:
Press the "alarm" button.
1.
The refrigerator compartment
temperature display shows Cn.
Press refrigerator compartment
2.
select button.
Press + button until the refrigerator
3.
compartment temperature display
shows rE and the freezer
compartment temperature display
shows OF.
Press freezer compartment select
4.
button.
Press the + button.
5.
The freezer compartment
temperature display shows an
animation for 15 seconds.
The freezer compartment
temperature display then shows OF.
The energy saving mode display
does not light up.
The Home Connect settings have
been reset.
All manuals and user guides at all-guides.com
Installing updates for the
Home Connect software
The refrigerator checks at regular
intervals whether updates are available
for the Home Connectsoftware.
If an update is available, the refrigerator
compartment temperature display
shows "UP".
Pressing any button will reset the
display to the set temperature.
Installing the update:
Press the "alarm" button.
1.
The refrigerator compartment
temperature display shows Cn.
Press refrigerator compartment
2.
select button.
Press + button until the refrigerator
3.
compartment temperature display
shows UP and the freezer
compartment temperature display
shows OF.
Press freezer compartment select
4.
button.
Press the + button.
5.
The freezer compartment
temperature display shows an
animation.
The update will be installed.
All buttons are locked during
installation.
If the installation was successfully
–
completed, the freezer
compartment temperature display
will show On.
If the installation was not
–
successfully completed, the
freezer compartment temperature
display will show Er.
Start the update again at a later
time.
Inform Customer Service if the
installation has still not been
successfully completed after
several attempts.
Home Connect en
43