Philips QP2525 Manual page 20

20
English
Problem
The appliance
does not charge
when it is
connected to
the mains.
I cannot switch
on the
appliance when
it is connected
to the mains.
The appliance
does not work
anymore.
Possible
cause
The appliance
has to be
switched off
when you
charge it.
You cannot use
the appliance
when it is
charging. You
can only use the
appliance
without cord.
The
rechargeable
battery is empty.
The blade is
blocked by dirt.
Solution
Switch off the appliance.
Disconnect the appliance from
the mains before use.
Charge the appliance (see
'Charging'). QP2531, QP2530:
During charging, the battery
status indicator flashes.
QP2526, QP2525, QP2522,
QP2521, QP2520: During
charging, the charging indicator
on the supply unit lights up. If
the battery status indicator on
the appliance does does not
flash or if the battery charging
indicator on the supply unit
does not light up, check
whether there is a power failure
or if the wall socket is live. If
there is no power failure and
the wall socket is live but the
battery charge indicator still
does not flash or light up, take
the appliance to your dealer or
a Philips service center.
Switch on the appliance and
rinse the blade under the tap
with warm water.