Table of Contents
Advertisement
Follow these instructions to install a wireless card:
1
Remove a blanking plate from the system case, and insert the wireless
card into the PCIE2 slot rightwards, then tighten the screw (Please refer
to Picture 1).
2
Press the metal connector of the cable into the connector on the wireless
card. Ensure that the metal connector is correctly seated (Please refer to
Picture 2).
3
Make the other end of the cable (with a gold screw) through the upper hole
of the bracket, and tighten the antenna on to the gold screw after
installing a metal gasket on the screw (Please refer to Picture 3).
Picture 1
Picture 2
* For reference only
H81H3-TI2 USER MANUAL
Picture 3
15
Advertisement
Table of Contents
