Table of Contents
Advertisement
4.
Select ADVANCED > Advanced Setup > USB Settings.
By default, Enable any USB Device connection to the USB port is selected. This setting
lets you connect and access all your USB drives.
5.
Select the No radio button.
6.
Click the Approved Devices button.
The approved and available USB devices display.
7.
In the Available USB Devices list, select the drive that you want to approve.
8.
Click the Add button.
9.
Select the Allow only approved devices check box.
10.
Click the Apply button.
Your change takes effect.
11.
To work with another USB device, first click the Safely Remove USB Device button for the
currently connected USB device. Connect the other USB device, and repeat this process.
N300 WiFi Cable Modem Router Model C3000
Share a USB Drive Attached to the Modem Router
41
Advertisement
Table of Contents
