Channel; Auto Search; Digital Setting; Analogue Setting - Sharp LC-80UD50H Operation Manual

Watching TV

Channel

Set the channel as you desired .

Auto search

You can run auto installation again, even after setting
up the preset channels.
NOTE
• Auto search can only search channels from the current
mode.

Digital setting

You can set some DTV channel items manually.
Auto search
Use this menu to add new DTV services automatically
after auto installation has been completed.
Manual search
Add new services within a specified frequency band.
Signal info
Show the "Channel No.", "Freq", "Signal strength" and
"Signal quality" of the current program.
NOTE
• The values of "Signal strength" and "Signal quality" indicate
when to check the appropriate alignment of the antenna.

Analogue setting

You can set some ATV channel items manually.
Auto search
Use this menu to add new ATV services automatically
after auto installation has been completed.
22
Manual search
You can set the channel manually.
Item
Storage to
Save programme to your desired
[1~99] channel number. Press OK to save.
Current CH Select the channel you want to edit.
Colour system Select the optimum colour system to
receive. (PAL, SECAM, NTSC)
Sound system
Select the optimum sound system
(Broadcasting system) to receive. (BG,
DK, I, MN)
Search
Start searching from current channel.
You can search the next channel by
/
pressing
Fine-Tune
Tune the frequency of the stored channel
to your desired position.

Program edit

Please see page 19.

Network

Please see pages 24 to 25.

Apps

Please see page 26.
Description
to adjust the frequency .