Table of Contents
Advertisement
4-7
Atpio Setup Utility - Copyright (C) 2007 American Megatrends, Inc.
Main
Advanced
Boot
Security
Save & Exit
Power Now (tm) Technology
[Enabled]
SATA Mode
[Disable]
Legacy USB Support
[
Enabled
]
PCI Legacy Timer
[32 PCI Bus Clocks]
Overclock Configuration
Downloaded from LpManual.com Manuals
All manuals and user guides at all-guides.com
Advanced Menu
PowerNow
This item allows you to enable or disable PowerNow technology. When
set to Enabled, the system always operates in a conserve power mode. If
you want optimize the processor, set this item to Disabled, so that the
processor's speed will vary depending on the use of your operating system
and applications. Default setting is set to Enabled.
Enable/disable the generation
of ACPI_PPC, _PSS, and _PCT
objects.
SATA Mode
Use this item to enable or disable the SATA Mode. Setting options:
Disabled and Enabled. The default is Disabled.
Select Screen
:
Select Item
:
Legacy USB Support
Enter:
Select
+/-:
Change Opt.
F1:
General Help
F2:
Previous Values
Selecting Enabled allows users to use USB devices, such as mouse,
F9:
Optimized Default
F4:
Save ESC: Exit
keyboard, or portable disk, in DOS system; or allows users to boot the
system by USB device. Setting options: Enabled, and Disabled.
PCI Latency Timer
This item controls how long each PCI device can hold the bus before
another takes over. When set to higher values, every PCI device can
conduct transactions for a longer time and thus improve the effective PCI
bandwidth. For better PCI performance, you should set the item to higher
values. Setting options: 32, 64, 96, 128, 160, 192, 224, and 248.
Advertisement
Table of Contents
