Srgb Support; Changing The Color Temperature; Installing The Srgb Icm File For Microsoft Windows 2000 And Windows Xp - HP LP2465 User Manual

Table 4-3 HP Display LiteSaver Configuration Options (continued)
Select This Option
Display On
Activity Extension
Show 1 minute Display Off Notice
Status
OK
Cancel
Help
Exit
View HP Display LiteSaver Readme on the CD for additional information on how to configure HP Display
LiteSaver.

sRGB Support

The monitor is designed to support sRGB for color management, which adapts to the color standards
used in the image technology industry.
To take advantage of the sRGB support, you will need to change the monitor's color temperature to
sRGB and install the sRGB color profile (ICM) file.
NOTE: The sRGB color temperature preset will improve the color accuracy of sRGB images on the
computer monitor, but some color variation may still occur.

Changing the Color Temperature

1. Press the
2. Select Advanced Menu to access all options in the Main Menu.
3. Select Color to display the Color Temperature menu.
4. Select sRGB.
5. Select Save and Return to exit the menu.

Installing the sRGB ICM File for Microsoft Windows 2000 and Windows XP

NOTE: To complete the following procedure, you must be logged in as an administrator or a member
of the administrator's group. If the computer is connected to a network, network policy settings may
prevent you from completing this procedure. The sRGB ICM file does not support Windows 95 and
Windows NT operating systems.
28 Chapter 4 Operating the Monitor
To Do This
Sets the time when the monitor automatically turns on. This does not affect screen
saver operation, which has priority over the HP Display LiteSaver.
Sets the time in minutes before the monitor turns off if there is any keyboard or mouse
activity after the Display Off time is reached. If the keyboard or mouse is used, then
HP Display LiteSaver waits until the set amount of time before turning the display
off again. Set to 0 to disable. If disabled, the monitor will turn off as soon as the
Display Off time is reached, regardless of keyboard or mouse activity.
Displays a popup message in the system tray 1 minute before the monitor is turned
off by HP Display LiteSaver.
Shows the time until the monitor is next due to be turned off by HP Display LiteSaver.
Stores the current settings and minimizes HP Display LiteSaver to the System Tray.
Restores the previous settings and minimizes HP Display LiteSaver to the System
Tray. HP Display LiteSaver will continue to run.
Opens the online help file.
Exits and closes the HP Display LiteSaver. It will no longer control the monitor power
until it is next run.
Menu button on the front panel of the monitor to launch the Main Menu of the OSD.
ENWW