System - D-Link DCH-M225/A1A User Manual

Section 3 - Web-based Coniguration
This page allows you to save or restore your system coniguration, reset or reboot the DCH-M225. To access this page, click
on the Management drop down menu at the top of the page, and select System. Click Save at any time to save the changes
you have made on this page.
Save Settings
Save the system settings into a ile to the local hard drive.
To Local Hard
You will then see a ile dialog where you can select a location
Drive:
and ile name for the settings.
Load Settings
Load the system settings from a ile on the local hard drive.
From Local
Hard Drive:
Restore
Restore the system settings to factory default settings. This
to Factory
will erase all currently stored settings.
Default
Settings:
Reboot the
Click Reboot to reboot the DCH-M225.
Device:
D-Link DCH-M225 User Manual

System

29