HP Pavilion F2105 User Manual page 58

Troubleshooting
Problem
Image is not
centered.
"Check Video
Cable" displays on
screen.
"Out of Range"
displays on screen.
USB 2.0 ports are
not working.
A–2
Possible Cause
Position may need
adjustment.
Monitor video cable is
disconnected.
Video resolution and
response rate are set
higher than what your
monitor supports.
USB hub cable is not
properly connected
between the monitor
and the PC.
Solution
Press the Menu button to
access the OSD menu.
Select Image Control/
Horizontal Position or
Vertical Position to adjust
the horizontal or vertical
position of the image.
Connect the monitor video
cable to the VGA connector
on the PC, or connect the
DVI-D signal cable to the
DVI connector on the PC. Be
sure that the PC power is off
while connecting the video
cable. DVI-D signal cable
and DVI-D connector are for
select models only.
Restart your PC and enter
Safe Mode. Change your
settings to a supported
setting. See the table "Preset
Video Modes" in
Appendix B. Restart your PC
so that the new settings take
effect.
Make sure the USB hub
cable is securely connected
to the monitor and the PC.
User's Guide