Changing Basic Settings - Siemens SN85Z800BE User Manual

Basic setting
Childproof lock
Wi-Fi
Remote Start
Factory setting
1
Factory setting (may vary according to model)

Changing basic settings

Open the appliance door.
1.
Press ⁠ .
2.
To open the basic settings, press
3.
for 3 seconds.
a The display shows H:xx.
a The display shows
Display text Selection
1
c:00 c:00 - c:01
Cn:00 Cn:00 - Cn:01
rc:01 rc:00 - rc:02
rE: Start with
Y:ES
Confirm with
⁠ .
Description
Switch the
→ "Electric childproof lock",
Page 11 on or off.
Level "c:00" switches the childproof
lock off.
Switch the wireless network connec-
tion on or off.
Level "Cn:00" switches the wireless
network connection off.
The basic setting "Wi-Fi" is only avail-
able once the appliance is connec-
ted to the Home Connect app.
→ "Home Connect ", Page 40
Activate or deactivate
→ "Remote Start ", Page 41.
The following settings are possible:
¡ With the setting "rc:00", the func-
tion is permanently deactivated.
¡ With the setting "rc:01", the func-
tion can be selected via the
button.
→ "Activating Remote Start ",
Page 41
¡ With the setting "rc:02", the func-
tion is permanently activated.
This basic setting is not available un-
til after you have connected the
device with the Home Connect app.
→ "Home Connect ", Page 40
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
Press
4.
the display shows the required set-
ting.
Press or
5.
display shows the right value.
You can change several settings.
To save the settings, press
6.
for 3 seconds.
Close the appliance door.
7.
Basic settings en
repeatedly until
repeatedly until the
39