Remote Control Buttons And Functions; Muting Button; Colour System Button; Sound System Button - JVC AV-21VS11 Instructions Manual

Remote control buttons and functions

MUTING button

You can turn the sound off instantly.
Press this button.
To turn the sound on, press this button
again.

COLOUR SYSTEM button

If the picture is not clear or no colour
appears, change the current colour system
to another colour system.
Press this button to select the colour
system.
AUTO PAL
NTSC4.43
AUTO:
Automatic colour system selection.
• For the colour systems in each country or
region, see the table "Broadcasting systems"
on page 21.
• If the picture is not normal in the AUTO
mode, change the AUTO mode to another
colour system.

SOUND SYSTEM button

If the sound is not clear even when the
picture appears normal, change the
current sound system to another sound
system.
Press this button to select the sound
system.
I
B/G D/K
• For the sound systems in each country or
region, see the table "Broadcasting systems"
on page 21.
• You cannot select any sound system when in
a VIDEO mode.
SECAM
NTSC3.58
M

CINEMA SURROUND button

You can enjoy an enhanced sound for a
wider audience by using CINEMA
SURROUND function.
Press this button to select one of the
CINEMA SURROUND mode.
HIGH/LOW:
When you listen to the stereo sound,
please select HIGH mode or LOW mode.
You can enjoy the sound for a wider
audience similar to the experience at the
theatre.
• In case that you setting up the CINEMA
SURROUND function to HIGH mode, there
may be slight volume distortion. In case that
occurs, please switch the HIGH mode to LOW
mode, the effect of CINEMA SURROUND
functions will be less noticeable, however, the
volume distortion will be corrected.
MONO SURROUND:
Select the MONO SURROUND mode,
when you listen to the mono sound.
You can enjoy the sound for a wider
audience similar to stereo sound.
OFF:
The CINEMA SURROUND function
switches off.

DISPLAY button

You can continuously display the current
channel number or VIDEO mode on the
screen.
Press this button.
To turn the display off, press this button
again.
• When selecting a VIDEO mode with no
signal, indication of the VIDEO mode
becomes fixed on the screen.
7