Table of Contents
Advertisement
Time Delay
You can set a time delay so that the washing machine
will start automatically and finish after a specified time
interval.
1
Press the power button.
2
Select a washing programme.
3
Press the Time Delay button and set time required.
4
Press the Start/pause button.
NoTE
• The delay time is the time to the end of the
programme, not the start. The actual running time
may vary due to water temperature, wash load
and other factors.
Wash
Time Save
This option can be used to reduce the time of a wash
programme. It is best used on lightly soiled loads.
Intensive
If the laundry is normal and heavily soiled, the Intensive
option is effective.
Temp.
The Temp. button selects the wash and rinse
temperature combination for the selected cycle. Press
this button until the desired setting is lit. All rinses use
cold tap water.
• Select the water temperature suitable for the type of
load you are washing. Follow the garment fabric care
labels for best results.
MFL69040460_EN_150817.indd 27
rinse
rinse+
Add rinse once.
rinse Hold
The cycle is paused until start button is pressed again
when rinse is finished.
Spin
• Spin speed level can be selected by pressing the Spin
button repeatedly.
• Spin Only
1
Press the power button.
2
Press the Spin button to select RPM.
3
Press the Start/pause button.
NoTE
• When you select 'No Spin', it will still rotate for a
short time to drain quickly.
27
2015-08-17 오후 2:31:27
Advertisement
Table of Contents
