Technical Specifications - HP HP92 User Manual

Technical Specifications

PICTURE TUBE
INPUT SIGNAL
MAX RESOLUTION
RECOMMENDED
WARM-UP TIME
POWER SOURCE
MANAGEMENT
ENVIRONMENT
TILT/SWIVEL STAND
When the monitor is turned off with the power button on the front
NOTE
panel, the power consumption falls below 1W but is not zero. To reach
zero power consumption in "off" mode, either unplug the power outlet
or use a power block with a switch.
Size
Phosphorous
Dot pitch
Face Plate
Video
Synchronization
Input Connector
INTERFACE
Horizontal
SCANNING
FREQUENCY
Vertical
366 x 273 mm ±1mm maximum viewable size
DISPLAY SIZE
1600 x 1200 (75Hz)
1280 x 1024 (85 Hz)
RESOLUTION
30 minutes to reach optimum performance level
203 MHz
PIXEL CLOCK
~100 to 240 V, ~50 to 60Hz
Current 1.5 A (1,5A)
ON 125W (max)
Standby mode low
POWER
Suspend mode 5W
Active off mode 5W
Power off mode 1W
Temperature
OPERATING
Humidity
436 (H) 446(W) 455(D) mm (including pedestal)
DIMENSIONS
18.4Kg (18,4Kg)
WEIGHT
Tilt Angle
Swivel Angle
HP 19" Color Monitor User's Guide
Technical Specifications
19-inch flat square tube
18.0-inch viewable image (353mm)
Red, Green, Blue P22 (medium short persistence)
0.26mm
Anti-glare, anti-static, screen coating
0.7V p p analog RGB
TTL level separate synchronization (negative/positive)
15-pin mini D-SUB
30 to 95 kHz
50 to 160 Hz
LED Green
LED Amber
LED Amber
LED Off
LED Off
0 C to 40 C
10% RH through 80% RH (without condensation)
- 5 to +12.5 (12,5
±45
English English 11