Bosch 300 Series User Manual page 43

Hide thumbs Also See for 300 Series:
Table of Contents

Advertisement

Issue
Detergent residue is
present in the deter-
gent dispenser or
the tab collecting
tray.
Excessive formation
of foam occurs.
Connection to home
network is not es-
tablished.
WLAN display is
flashing.
Home Connect can-
not be implemented
correctly.
Refill indicator for
rinse aid lights up.
Refill indicator for
rinse aid does not
light up.
Display flashes.
Cause and troubleshooting
Spray arms were blocked by dishware so deter-
gent was not rinsed out.
Check that the spray arms are not blocked and
can rotate freely.
Detergent dispenser was damp when detergent
was added.
Only add detergent to the detergent dispenser
when dry.
Hand soap got in the rinse aid dispenser.
Immediately add rinse aid to the dispenser.
→  "Adding rinse aid", Page 19
Rinse aid has been spilled.
Remove the rinse aid with a cloth.
Detergent or machine care product used causes
excessive foaming.
Change the brand of detergent.
WLAN on router is not active.
Check the wireless network connection of your
router.
Connection to home network is not available.
Activate the wireless network connection on
your router.
Home Connect set incorrectly.
Please consult the documents supplied for
Home Connect.
There is a technical error.
Please consult the information on support in
the documents supplied for Home Connect.
No rinse aid.
Add Rinse aid →  Page 19 .
1.
Set the amount of rinse aid to be dispensed.
2.
→  "Setting the amount of rinse aid", Page 19
Rinse aid system is switched off.
Set the amount of rinse aid.
Appliance door is not closed properly.
Close the appliance door.
Arrange the dishware so that no parts
project beyond the rack and prevent the ap-
pliance door from closing properly.
Troubleshooting en-us
43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spe53b55ucSpe53b56ucSpe53b52uc

Table of Contents