HP FS7600 User Manual page 14

COLOR selection
The white of the image can be adjusted.
Use the – + button to select: (1) 9300°K,
(2) 6500°K, (3) 5500°K or (4) User color.
Press the select button to display the
USER COLOR adjustment screen.
User Color
The white of the video image can be adjusted to
the user's preferred color.
1 Use the select button to select R (red),
G (green) or B (blue).
2 Use the – + button to adjust the color as
desired.
Memory recall of the user's color
IMPORTANT:
is not possible, so take note of the initial setting
before adjusting.
When the monitor is turned OFF, user color
keeps the last adjustment.
8
User's Guide
Filename: sa517093.doc Title: User's Guide
Template: Print_2004.dot Author: WASSER Studios
Revision #: 36 Page: 8 of 20 Printed: 12/01/04 12:35 PM
Manual Degaussing
After moving the selector to the degauss icon,
press the select button. The degaussing action
takes place a few seconds later.
A sharp snap noise may be heard when
NOTE:
degaussing occurs. This is normal.
Memory Recall
It is possible to restore adjustments to the
original factory settings. If the monitor is
operating in a user defined mode, this control
has no effect.
Horizontal Moiré
Reduce the dark wavy line Moiré pattern on the
screen.
Press the – or + button to minimize the
horizontal moiré image on the screen.
Last Saved By: billm