If you are using a modem-router (gateway), it might be using 192.168.1.1 and you might need
to enter the IP address 192.168.11.1.
Note—If none of those options launches the setup wizard, go to
www.belkin.com/support/setupIP for more help.
6. Once you are finished with setup, please be sure to register your router so we can keep
you informed security updates, product recalls and other things that will improve your
experience.
Note–Your router becomes a parent node once you complete the setup. You can change to a
traditional Wi-Fi setup by turning off EasyMesh Parent Node on the Basic Wireless Settings
screen of the router's settings.
If you're adding this router to your existing E5600 EasyMesh Wi-Fi, follow these steps.
Note—If you have used this router before, reset it to factory default settings before adding it
to your EasyMesh Wi-Fi. You can do this in the Administration tab of the router's settings or
by pressing and holding the reset button on the back of the router for 10 seconds.
Using a computer or mobile device, connect to your parent router (the one connected
•
to your modem) wirelessly or with an ethernet cable
Visit myrouter.local in a web browser to log in to the parent router's settings
•
You also can enter 192.168.1.1 in a browser to access the parent router's
o
settings
Note-If neither of those options take you to the parent router's settings login
screen, go to www.belkin.com/support/setupIP for more help.
Enter the parent router password. (Default is "admin".)
•
Go to Wi-Fi > Basic Wireless Settings and click on Add a new node
•
6