en Home Connect
Basic setting
Remote Start
Factory setting
1
Factory setting (may vary according to model)
Changing basic settings
Press
.
1.
To open the basic settings, press
2.
for 3 seconds.
a The display shows Hxx.
a The display shows
Press
3.
the display shows the required set-
ting.
Press
repeatedly until the dis-
4.
play shows the right value.
You can change several settings.
To save the settings, press
5.
for 3 seconds.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
34
Display text
Selection
1
rc1
rc0 - rc2
rE
Start with
YES
Confirm with
.
repeatedly until
Description
Activate or deactivate
→ "Remote Start
The following settings are possible:
¡ With the setting "rc0", the func-
tion is permanently deactivated.
¡ With the setting "rc1", the func-
tion can be selected via the
button.
→ "Activating Remote Start
Page 35
¡ With the setting "rc2", the func-
tion is permanently activated.
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
Home Connect
Home Connect
This appliance is network-capable.
Home Connect
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
and to the Home Connect app.
¡ → "Connecting the appliance to
WLAN home network (Wi-Fi)",
Page 35
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
", Page 35.
",
1
)