If The Oven Is To Switch On And Off Automatically; Rapid Heating - Bosch HGV74W257N Instruction Manual

@ A
Use the or button to set the cooking time.
4.
@
Default value for the button = 30 minutes
A
Default value for the button = 10 minutes
PLQ
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
twice and switch off the function selector.
Changing the setting
0
Press the Clock button. Use the + or - button to change the
cooking time.
Cancelling the setting
0
Press the Clock button. Press the - button until zero is
shown on the display. Switch off the function selector.
Setting the cooking time if the clock is hidden
0
Press the Clock button twice and make your settings as
described in point 4.
If the oven is to switch on and off
automatically
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Example in the picture: Setting for
190 °C. It is 10:45 . The meal takes 45 minutes to cook and
should be ready at 12:45 .
The function selector is used to set the type of heating.
1.
2. The temperature selector is used to set the temperature or
grill setting.
0
Press the Clock button.
3.
@ A
Use the or button to set the cooking time.
4.
0
5. Press the Clock button repeatedly until the
flashes.
You can see in the display when the meal will be ready.
PLQ
K PLQ
VHF
0
button
%
Top/bottom heating at
y
End symbol
K
PLQ
VHF
@
Use the button to set a later end time.
6.
The setting is adopted after a few seconds.
The end time is shown in the display until the oven starts.
PLQ
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
twice and switch off the function selector.
Note: You can make changes as long as the symbol is
flashing. When the symbol lights up, the setting has been
adopted.

Rapid heating

With rapid heating, your oven reaches the temperature selected
particularly quickly.
Use rapid heating when temperatures above 100 °C are
selected.
To ensure an even cooking result, do not place your dish in the
cooking compartment until rapid heating is complete.
1. Set the function selector to
Turn the temperature selector to set the desired temperature.
2.
p
The symbol lights up in the display. The oven begins to heat
up.
The rapid heating process is complete.
p
The symbol goes out in the display. Place your dish in the
oven and select the desired type of heating.
K
PLQ
VHF
0
button
I
.
15