Corded Buttonhole - Janome HD1800 Instruction Book

q w
r
z x c v
b n
m ,

Corded Buttonhole

e
q Pattern selector: BH
w Presser foot:
3
2
4
e Thread tension: 1–5
r Stitch length:
t
t Stitch width:
* Set the stitch width in accordance with the
thickness of the cord used.
* To cut the opening and to reset for sewing the
next buttonhole, refer to the instructions on
page 24.
z With the buttonhole foot raised, hook the
x Bring the ends toward you under the
c Hook the filler cord info the forks on the front
v Lower the needle into the garment where the
b Depress the foot control gently and sew the
n Remove the fabric from the machine and cut
m Pull the left end of the filler cord to tighten it.
, Thread the end through a darning needle,
26
Automatic buttonhole foot R
0.5–1
4–6.5
filler cord on the cord spur at the back of the
buttonhole foot.
buttonhole foot until they clear the front end.
of the automatic buttonhole foot R to hold
them tight.
buttonhole will start and lower the foot.
buttonhole.
Each side of the buttonhole and the bartacks
will be sewn over the cord.
the sewing threads.
draw to the bottom side of the fabric and cut.