Table of Contents
Advertisement
All manuals and user guides at all-guides.com
CLT9950 2nd
6/19/00
4:10 PM
ADDITIONAL
Installing the belt clip
To attach the belt clip
Insert the belt clip into the holes on
each side of the handset. Press down
until it clicks.
Note:
When the belt clip is attached onto
the handset, you can hang the
handset on the wall-mounted base
with the keypad facing inside only.
Headset installation
Your phone may be used with an optional headset.
To use this feature, simply plug a standard shielded
headset with a 2.5-mm plug into the headset jack.
Your phone is ready for hands-free conversation.
Note:
Not all headsets are the same. Some headsets may
lower volume levels or performance of the phone.
E42
Page 46
INFORMATION
To remove the belt clip
Pull both sides of the belt clip to release
the tabs from the holes.
headset
jack
Advertisement
Table of Contents
