Table of Contents
Advertisement
Dell P2418HZ
A message is displayed while the cable supporting DP alternate mode is connected
to the monitor under the following conditions:
∞ When Auto Select for USB-C is set to Prompt for Multiple Inputs.
∞ When the DP cable is connected to the monitor.
The OSD functions only in the normal operation mode. When any button is pressed
in the Active-off mode, the following message will be displayed:
Dell P2418HZ
Activate the computer and the monitor to gain access to the OSD.
See
Troubleshooting
│
52
Operating your monitor
Dell 24 Monitor
?
No USB Type-C Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/P2421DC
Dell P2418HZ
Dell 24 Monitor
Switch to USB-C Video Input
Dell 24 Monitor
?
No HDMI signal from your device.
Press any key on the keyboard or move the mouse to wake it up.
If there is no display, press the monitor button again to select
the correct input source.
for more information.
Yes
No
P2421DC
P2421DC
P2421DC
Advertisement
Table of Contents
