Information Codes - Samsung DW80R7060US User Manual

Information codes

The Control Panel displays information codes to help you understand what is occurring
with your dishwasher.
Code
Leakage check.
• If a water supply valve connection leak occurs, close the water supply
LC
valve and go to your house circuit breaker panel, set the dishwasher's
circuit breaker switch to off, and then contact the installer to fix.
If the problem continues, contact an authorized Samsung service center.
Water supply check.
• Check if the water supply valve is closed or clogged, or is frozen. Also
4C
check if the supplied water pressure is less than required.
If the problem continues, close the water supply valve, and then contact
an authorized Samsung service center.
Drain check.
• After closing the water supply valve, check whether the drain hose is
5C
clogged or folded. Also, check whether the drain hole inside the sump is
clogged.
If the problem continues, contact an authorized Samsung service center.
High temperature heating check.
• Functional check. With the dishwasher empty, add detergent, and then
HC
run a cycle. If the problem continues, go to your house circuit breaker
panel, set the dishwasher's circuit breaker switch to off, and then contact
an authorized Samsung service center.
Pump operation check.
3C
• Functional check. Turn off the dishwasher and try to start it again.
If the problem continues, contact an authorized Samsung service center.
Zone wash function check.
PC
• Functional check. Turn off the dishwasher and try to start it again.
If the problem continues, contact an authorized Samsung service center.
For any codes not listed above, call 1-800-SAMSUNG (726-7864).
DW8000R_DD68-00211A-00_EN.indd 47
Action
English 47
2019-04-24 5:59:20