Electrolux EUM0900SA User Manual page 7

Before plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the
Fridge/Freezer. If not see the section called ELECTRICAL INFORMATION on page 12.
Before switching on!
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE FRIDGE/FREEZER.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30
minutes before switching back on to allow the coolant fluid to settle.
Before filling your Fridge/Freezer
Before storing foods in your Fridge/Freezer, turn the Fridge/Freezer on and wait for 24
hours, to make sure it is working properly and to allow the Fridge/Freezer to fail to the
correct temperature. See page 9 for more details.
START
Testing
1. Clean the parts of the refrigerator with lukewarm water containing a little neutral
detergent and with clear water, and wipe them dry.
E
Notes:
lectric parts of the refrigerator can only be wiped by dry cloth.
2.Turn the thermostat knob to the "3" position, turn on electricity. The compressor and the
light inside the refrigerator begin to work.
3.Open the door 30 minutes later, if the temperature in the refrigerator decreased
obviously, it shows that the refrigerator system works well. When the refrigerator operates
for a period of time, the temperature controller will automatically set the temperature within
limits it opens.
7