Before removing the Bluetooth module and cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
Optical drive (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
Remove the Bluetooth module and cable:
1.
Disconnect the Bluetooth module cable (1) from the system board.
2.
Release the Bluetooth module cable from the clips (2) and the routing channel built into the front
speaker assembly.
3.
Release the Bluetooth module (3) from the clip built into the front speaker assembly.
4.
Remove the Bluetooth module and the Bluetooth module cable.
80
Chapter 4 Removal and replacement procedures
Battery on page
59), and then remove the following components:
Optical drive on page
Hard drive on page
62)
Keyboard on page
70)
Top cover on page
74)
60)