4
Power settings
This section explains standby, hibernation, and shutdown procedures.
Turning the computer or display on or off
Task
Turn on the computer.
Shut down the computer.*
Turn off the display while the
power is on.
*If you have been registered to a network domain, the button you click will be called Shut Down instead of Turn Off Computer.
ENWW
Procedure
Press the power button.
1.
Save your work and close all open applications.
2.
Shut down the computer through the operating
system by selecting Start > Turn Off Computer
> Turn Off.*
Close the computer.
Result
●
The power lights are turned
on.
●
The operating system loads.
●
The power lights are turned
off.
●
The operating system shuts
down.
●
The computer is turned off.
Closing the computer activates the
display switch, which initiates
standby.
Turning the computer or display on or off
9