Air Index; Specifications - Honda HRX217HYAA Owner's Manual

Maintenance
As the power equipment engine owner, you are responsible for
completing all required maintenance listed in your owner's manual.
Honda recommends that you retain all receipts covering maintenance
on your power equipment engine, but Honda cannot deny warranty
coverage solely for the lack of receipts or for your failure to ensure
that all scheduled maintenance has been completed.
Follow the Maintenance Schedule on
schedule is based on the assumption that your Honda engine product
will be used for its designed purpose. Sustained high-load or
high-temperature operation, or use in dusty conditions, will require
more frequent service.

Air Index

(Models certified for sale in California)
An Air Index Information label is applied to engines certified to an
emission durability time period in accordance with the requirements of
the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability to
compare the emissions performance of available engines. The lower
the Air Index, the less pollution.
The durability description is intended to provide you with information
relating to the engine's emission durability period. The descriptive
term indicates the useful life period for the engine's emission control
system. See your EMISSION SYSTEM WARRANTY
additional information.
Descriptive Term
Moderate 50 hours (0 ~ 80 cc)
125 hours (greater than 80 cc)
Intermediate 125 hours (0 ~ 80 cc)
250 hours (greater than 80 cc)
Extended 300 hours (0 ~ 80 cc)
500 hours (greater than 80 cc)
1000 hours (225 cc and greater)

Specifications

Mower Features
HRX217K6HYAA Honda rotary mower, 21-inch mower deck,
HRX217K6HYPA Clip Director, hydrostatic transmission,
blade brake clutch, Auto Choke System
Dimensions and Weights
Length
Width
Overall height *
Dry mass**
Cutting width
Cutting heights (7)
* 1-1/4 inch (32 mm) cutting height and handle in highest position
** Includes the grass bag
page 11. Remember that this
(page 23) for
Applicable to Emissions
Durability Period
65.6 in (1,665 mm)
23.1 in (588 mm)
44.2 in (1,122 mm)
97.47 lb (44.2 kg)
20.9 in (530 mm)
3/4 ~ 4 in (19 ~ 101 mm)
Engine Design and Performance
Model
Type
Displacement
Bore and stroke
Compression ratio
Ignition system
Transmission Design and Performance
Transmission type
Ground speed
Maintenance
Fuel Unleaded gasoline with a pump
octane rating of 86 or higher containing
no more than 10% ethanol by volume
Capacity: 0.24 US gal (0.91 L)
See "AVOIDING FUEL-RELATED
PROBLEMS" on
Blade Bolt 36 ~ 43 ft-lb (49 ~ 59 N•m)
Torque
Engine Oil SAE 10W-30, API SJ or later
Capacity: 13.5 oz (0.40 L)
Refill amount: 12.0 ~ 13.5 oz
Spark Plug Type: NGK - BPR5ES
Gap: 0.028 ~ 0.031 in (0.7 ~ 0.8 mm)
Maximum 3,100 +0/-150 rpm **
Governed
Speed
Valve Intake: 0.10 ± 0.02 mm
clearance Exhaust: 0.10 ± 0.02 mm
(cold)
* Actual amount will vary due to residual oil in the engine. Always
use the dipstick to confirm the actual level
**Do not try to increase the engine speed above the maximum
governed speed; the blades could fracture and come apart.
GCV200
4-stroke, single-cylinder, air-cooled
12.3 cu in (201 cc)
2.60 x 2.32 in (66.0 x 59.0 mm)
8.0:1
Transistorized magneto
Variable speed
0 to 3.6 ~ 4.0 mph
(0 to 1.60 ~ 1.85 m/s)
page 20
(0.35 ~ 0.40 L)*
(page 6).
page 7
page 12
page 13
page 14
Shop
manual
Shop
manual
19