Table of Contents
Advertisement
Display
Use Display to adjust image.
Aspect Ratio
Adjusts the image ratio to Wide 16:10, Auto Resize, 4:3, or 1:1.
Brightness
Activating this feature to maintain stable brightness level and shorten
cold startup time.
Stabilization
NOTE:
or Standard.
Monitor Sleep
Allows you to let the monitor turn off automatically or stay on when
your computer goes into sleep mode. When Sleep After Timeout is
selected, the monitor goes to sleep as the system sleeps; when Never
is selected, you may prevent the screen from going off as the system
sleeps for speedy display recovery from PC wake up.
Horizontal
Use
Position
Maximum is '100' (+).
Vertical
Use
Position
Maximum is '100' (+).
NOTE:
only available for "VGA" input.
Sharpness
This feature can make the image look sharper or softer. Use
Pixel Clock
The Phase and Pixel Clock adjustments allow you to adjust your
monitor to your preference.
Use
Phase
If satisfactory results are not obtained using the Phase adjustment, use
the Pixel Clock (coarse) adjustment and then use Phase (fine), again.
NOTE:
input.
Reset Display
Select this option to restore default display settings.
This option is only available when the Preset Modes is DICOM
or
to adjust the image left or right. Minimum is '0' (-).
or
to adjust the image up or down. Minimum is '0' (-).
Horizontal Position and Vertical Position adjustments are
to adjust the sharpness from '0' to '100'.
or
to adjust for best image quality.
Pixel Clock and Phase adjustments are only available for "VGA"
Operating the Monitor
or
47
|
Advertisement
Table of Contents
