HP OmniBook 800 Installation And Setup Manual page 64

Changing the Configuration
Using the System Configuration Utility
Input/Output menu
COM Port
LPT Port
LPT Type
Keyboard Setup
External devices
Audio Port
Basic Audio
Advanced Audio
Video Stretched
Enable IrDA IR
Power menu
Power Controls
Port Activity
Defaults menu
Factory Default Settings
Restore Settings
Exit menu
Save
Quit
Version Info
4-10
Sets serial port address and interrupt.
Sets printer port address and interrupt.
Sets printer port communication.
"Key Delay" sets how long you hold a key down before the character starts repeating.
"Key Repeat Rate" sets how fast characters repeat.
"Keyboard Numlock" sets whether Num Lock is active after rebooting.
"VGA Display device" sets whether the built-in display is on or off when an external display is present.
(You can press FN+PrtSc at any time to cycle among the different display combinations.)
"Force recognition of external VGA" overrides automatic detection of an external display. (You can press
FN+PrtSc at any time to cycle among the different display combinations.)
"Enable External FN Key" lets you press CTRL+ALT instead of FN on an external keyboard with no FN key.
"Ignore External Pointing Device" activates the built-in mouse when an external mouse is connected.
"Disable internal" turns off the internal sound chip, such as when using an external sound card.
Sets the volumes for the beeper signal and the sound speaker.
Sets system resources used by audio devices.
On or Off. Expands video so a VGA-sized image fills the entire screen. (You can press FN+TAB at any time
to change this.)
On of Off. Makes the infrared port compatible with the IrDA standard.
"CPU Power Management" should be Maximum for greatest power savings.
"Auto Turn-off w/Battery" and "HDD Power-down w/Battery" are automatic turn-off times.
"Auto Turn-off w/AC" sets whether the computer turns off when the ac adapter is connected.
"Enable audio power savings" lets the audio system turn off while it's not busy.
Lets you select ports that don't override automatic turn-off.
Resets all settings to defaults without exiting.
Discards changes without exiting.
Saves changes and exits.
Discards changes and exits.
Shows the BIOS version.