Bosch CTL636E 6 Series Instruction Manual page 52

en Service programmes
Cleaning
Takes about 5 minutes.
■ Touch E.
■ Touch [ Clean ] to select the programme.
■ The display indicates the progress
of the programme.
■ Clean the beverage outlet and replace,
empty the drip trays and replace.
■ Open the ground coffee drawer, drop in
a cleaning tablet and close the coffee
drawer again.
■ Close the appliance door.
■ Place a container with a capacity of
0.5 litre under the beverage outlet.
■ Press C. The cleaning programme will
now run for about 5 minutes.
■ Remove the container, empty the drip trays,
replace and close the appliance door.
■ Press C. The appliance has finished
cleaning and is ready for use again.
■ Touch E to exit the program.
Calc'nClean
Takes about 26 minutes.
Calc'nClean combines the functions
Descale and Clean. If both programmes
are due to be carried out close together, the
fully automatic coffee machine will automat-
ically suggest this service programme.
■ Touch E.
■ Touch [ Calc'nClean ] to select the
programme.
■ The display indicates the progress
of the programme.
■ Clean the beverage outlet and replace,
empty the drip trays and replace.
■ Open the ground coffee drawer, drop in
a cleaning tablet and close the coffee
drawer again.
■ Remove the water filter (if there is one)
and press C
■ Pour lukewarm water into the empty
water tank up to the "0.5 l" mark and
then dissolve one Bosch descaling tablet
TCZ8002A in it.
52
F
If there is not enough descaling
solution in the water tank, you will be
asked to do the following. Refill using
uncarbonated water and press C
again.
■ Remove the suction pipe from milk
container, wipe it and insert the end of the
suction pipe into the hole on the coffee
grounds container.
■ Close the appliance door.
■ Place a container with a capacity of
0.5 litre under the beverage outlet.
■ Press C. The programme will now run
for about 19 minutes.
■ Remove the container and press C.
■ Rinse the water tank and (if removed)
replace the water filter.
■ Fill the tank with fresh water up to the
"max" indicator.
■ Replace the water tank and close the
door.
■ Place the container underneath the
beverage outlet again.
■ Press C. The programme will now
run for about 7 minutes and rinse the
appliance.
■ Remove the container, empty the drip
trays, replace and close the appliance door.
■ Press C. The appliance is descaled,
cleaned and ready for use again.
■ Touch E to exit the program.
Special rinsing
F
Important: If any of the service
programmes is ever interrupted, for
instance by a power failure, please
proceed according to the information
on the display:
■ Rinse the water tank and refill it with fresh
water up to the "max" mark.
■ Press C. The programme will now
run for about 2 minutes and rinse the
appliance.
■ Empty the drip trays, replace and close
the appliance door. The appliance is
ready for use again.
■ Touch E to exit the program.