Removing The Cover; Replacing The Power Supply; Replace The Power Supply - TYAN FT77-B7015 Service Engineer's Manual

3.3

Removing the Cover

Before replacing any parts you must remove the chassis cover.
Follow Chapter 2.1.1 to remove the cover of FT77-B7015.
3.4

Replacing the Power Supply

3.4.1 Replace the power supply

To replace the power supply follow these instructions.
1. Press the tab as shown in the diagram and pull out the power.
2. Free the power from the power socket.
3. Replace a new single power (FRU NO: CPSU-0420) and
reinsert it into the power socket following the above steps in
reverse.
46
http://www.tyan.com