Electrical Safety - Black & Decker MT280 Original Instructions Manual

ENGLISH
Labels on tool
The following pictograms are shown on the
tool:
Warning! To reduce the risk of injury,
the user must read the instruction
manual.
Warning! Always wear a dust mask
when using this tool.

Electrical safety

This tool is double insulated;
therefore no earth wire is required.
Always check that the power supply
corresponds to the voltage on the
rating plate.
• If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Features
This tool includes some or all of the
following features.
1. On/O switch
2. Variable speed dial
3. Super-lokTM Tool free accessory
clamping lever
4. Sanding base
5. Dust extraction adapter
6. Tooled accessory adapter (spacer)
7. Tooled accessory adapter (Fixing bolt)
Accessories
This tool includes some or all of the
following accessories. The performance of
your tool depends on the accessory used.
BLACK+DECKER and Piranha accessories
are engineered to high quality standards
and designed to enhance the performance
of your tool. By using these accessories you
will get the very best from your tool.
8
(Original instructions)
Precision plunge cut
saw blade for wooden
materials, soft plastics.
(Part number -
X26105-XJ)
Separating, plunge and
flush cutting of wood
and soft plastics. Ideal
for working on doors,
skirting boards,
windowsills and flooring.
Plunge cut saw blade
for wood and metal.
(Part number -
X26110-XJ)
Separating, plunge and
flush cutting of wood,
plastics, thin-walled
non-ferrous pipes and
extrusions, nails and
screws.
Plunge cut saw blade
for wood and metal.
(Part number -
X26115-XJ)
Separating, plunge and
flush cutting of wood,
plastics, thin-walled
non-ferrous pipes and
extrusions.
Segmented saw blade.
(Part number -
X26120-XJ)
Long life blade which is
ideal for cutting wood,
plastics, thin walled
ferrous and non-ferrous
material.
Rigid scraper.
(Part number -
X26135-XJ)
Ideal for removal of hard
and soft material from
flat surfaces such as the
removal of vinyl flooring,
bonded carpet adhesive,
tile floor adhesive,
grout, paint and varnish.
Flexible scraper.
(Part number -
X26140-XJ)
Ideal for removal of
elastomer materials
from hard flat surfaces
in di cult to reach areas
such as silicon sealant
and other caulking
materials.