Connecting To A Local Area Network - HP G60-445 User Manual

2

Connecting to a local area network

Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased
separately). If the network cable contains noise suppression circuitry (1), which prevents interference
from TV and radio reception, orient the circuitry end of the cable (2) toward the computer.
To connect the network cable:
1. Plug the network cable into the network jack (1) on the computer.
2. Plug the other end of the cable into a network wall jack (2).
WARNING!
modem cable or telephone cable into an RJ-45 (network) jack.
8 Chapter 2 Connecting to a local area network
To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a