Table of Contents
Advertisement
Figure 45. Removing the system cover
Next steps
1.
Install the system
cover.
Installing the system cover
Prerequisites
NOTE:
Ensure that all internal cables are connected and placed out of the way and no tools or extra parts are left inside
the system.
Follow the safety guidelines listed in
Steps
1. Align the tabs on the system cover with the slots on the chassis.
2. Press the cover release latch, and push the cover toward the chassis until the latch locks into place.
3. Rotate the latch release lock clockwise to the locked position.
Safety instructions
on page 65.
Installing and removing system components
87
Advertisement
Table of Contents
