Brother P-Touch PT-D600 User Manual page 46

LABEL PRINTING
Setting
• Automatically cuts a piece of blank
Chain
• Once the last label is printed, the tape
• Select this setting when printing
• Once the label is printed, the tape is
No Cut
• Select this setting when using special
• When using Fabric Iron-On Tapes or
Special
tape
43
Setting Tape Cutting Options
Description
tape before printing the first label and
then cuts the tape after each label is
printed, leaving a 0.08" (2 mm) margin
at both ends of each label.
is not fed and cut. Press (
( ) to feed and cut the tape.
multiple copies of a label and you do
not want the labels cut after each label
is printed, or when using Fabric Iron-
On Tapes or other special tapes that
cannot be cut by the tape cutter of the
P-touch labeler.
not fed and cut.
Press ( ) and (
the tape.
When using the special tapes that
cannot be cut by the tape cutter of
the P-touch labeler, remove the tape
cassette from the P-touch labeler
and use scissors to cut the tape.
tape.
Heat Shrink Tube, select [Special
tape] for Cut Options before printing.
After printing, remove the tape
cassette from the P-touch labeler and
use scissors to cut the tape.
) and
) to feed and cut
• When multiple copies
• When a label is printed
1. 1st print
2. 2nd print
Example
ABC ABC
0.08" 0.08"
(2 mm) (2 mm)
0.96"
(24.5 mm)
ABC AB
0.96" 0.16"
(24.5 mm) (4 mm)
are printed one time:
ABC ABC ABC
0.96" 0.16" 0.16"
(24.5 mm) (4 mm) (4 mm)
two times:
1 2
ABC ABC
1.04"
0.96"
(26.5 mm)
(24.5 mm)