Frigidaire Gallery Series Use & Care Manual page 9

Reinstalling the Custom-Flex
Temp Drawer
1 Place drawer with brackets and sliders
inside compartment and click sliders into
place on each side.
2 Reconnect cabinet harness.
3 Replace retaining clip and secure with screw.
Reconnect
Cabinet Harness
1
4 Reattach electrical harness by positioning
the cable clips over the black markings
on the harness and push the 4 cable clips
through openings in rail to secure harness
in place.
Black
Marking
5 Slide basket
into place.
6 Close
drawer.
DOOR REMOVAL INSTRUCTIONS
TM
Screw
2
Retaining Clip
Position
cable clips
over the black
markings before
attaching.
Removing Freezer Drawer
CAUTION
Drawer is heavy. Use caution when lifting.
1 Open drawer and fully extend.
2 Remove the freezer drawer.
3 Remove the freezer basket.
4 Inside the cabinet, press the two tabs on
both sides to release the sliders.
5 Remove the drawer with brackets and
sliders.
Reinstalling Freezer Drawer
1 Place drawer with brackets and sliders
inside the cabinet and click into place.
2 Replace the basket.

NOTE
For additional instructions, see Storage
Features section.
Press the two tabs
on both sides to
release the sliders
Freezer
Drawer
Freezer
Basket
9