Advertisement
Quick Links
HP Wireless Optical Ergo
Mouse
User's Manual
© Copyright 2004 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice
The only warranties for HP products and services are set forth in the
express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
Part Number P2357AA #ABA
07/2004: 07/22
Advertisement
Related Manuals for HP P2357AA
Summary of Contents for HP P2357AA
- Page 1 The information contained herein is subject to change without notice 07/2004: 07/22 The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
- Page 2 FCC STATEMENT This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules.
- Page 3 Contents Welcome Installation Configuration Troubleshooting...
- Page 4 - 3 - Welcome Congratulations on purchasing the HP Wireless Optical Ergo Mouse. This guide will provide you with the necessary steps for installing and maintaining your mouse. Package Contents HP Optical 4-Button USB USB Receiver CD with Driver/Software Mouse 2 AA Batteries User’s Manual...
- Page 5 - 4 - Installation Battery Installation STEP 1 - Locate the 2 AA sized 1.5 Volt batteries that came with your HP Wireless Optical Ergo Mouse. STEP 2 - Remove the battery compartment cover located on the bottom of your mouse by pressing the tab forward.
- Page 6 - 5 - Hardware Installation STEP 1 - Power on your system. STEP 2 - Connect the USB receiver to any available USB port or hub connected to your computer. User Setup By default your mouse works immediately. If the receiver and mouse are not synchronized, perform the following procedure STEP 1 –...
- Page 7 Configuration You can configure the buttons of this mouse to perform selected functions. Windows XP – Category View Click Start, select Settings / Control Panel / Printers and Other Hardware / Mouse, to customize your mouse settings. Windows 98SE, Me, 2000 and XP – Classic View Click Start, select Settings / Control Panel / Mouse, to customize your mouse settings.
- Page 8 The Universal Serial Bus Controller and USB root hub may not be properly installed on your system. Contact your computer manufacturer for details. Technical Support For technical assistance call 1-866-314-7239 or visit www.microinv.com/hp Technical Support hours of operation: Monday - Friday 8:30am to 10:00pm E.S.T. - 8 -...