Table of Contents
Advertisement
Appendices
Use of Keystone
is not recom-
mended.
50
English
Image is out of focus
Make sure the Lens cap is removed.
4
Adjust the Focus Ring on the projector lens.
4
Make sure the projection screen is between the required distance.
4
See pages 16-17.
The image is stretched when displaying 16:9 DVD title
When you play anamorphic DVD or 16:9 DVD, the projector will
4
show the best image when the projector display mode is set to
16:9 in the OSD.
If you play 4:3 format DVD titles, please change the format to 4:3
4
in the projector OSD.
If the image is still stretched, you will also need to adjust the
4
aspect ratio by referring to the following:
Please setup the display format as 16:9 (wide) aspect ratio type
4
on your DVD player.
Image is too small or too large
Adjust the Zoom Ring on the top of the projector.
4
Move the projector closer to or further from the screen.
4
Press "Menu" button on the remote control, go to "Display
4
Format" and try the different settings.
Image has slanted sides
If possible, reposition the projector so that it is horizontally
4
centered on the screen and below the bottom of the screen.
Press "Keystone +/-" button on the remote control until the sides
4
are vertical.
Use "Display
V Keystone" from the OSD to make an adjust-
4
ment.
Image is reversed
Select "SETUP
4
projection direction.
Projection" from the OSD and adjust the
Advertisement
Table of Contents
