Connections and operating elements
5
Connections and operating elements
18
1 115V / 60Hz ~ 230V / 50Hz
Mains voltage selector. Make sure this selector is set correctly for the actual supply
voltage at the operating location. Use this switch only when the device is switched
off! Use a suitable screwdriver.
2 OUTPUT
XLR mounting plug for line signal output.
3 INPUT
XLR/1/4" combo socket for line signal input.
4 CLIP
Indicates overloading (Clipping). In this case the level of the input signal is too high.
5 120Hz LOW CUT
Use this switch to attenuate the low frequencies below 120 Hz.
active full-range speaker