Preparing The Computer For Disassembly - HP Compaq Presario,Presario V2600 Maintenance And Service Manual

Removal and Replacement Procedures
Disassembly Sequence Chart (Continued)
Section Description
5.11 Display Assembly
Display bezel
Display release hooks
Display inverter
Display hinge covers
Display panel
Display hinges
Wireless antenna transceivers
5.12 Base Enclosure
5.13 USB/S-Video Board
5.14 Bluetooth Module
5.15 Speaker Assembly
5.16 RTC Battery
5.17 Fan/Heat Sink Assembly
5.18 Processor
5.19 System Board
5.20 LED Board
5.21 ExpressCard Assembly
5.3 Preparing the Computer for
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the computer. If you are unsure whether the
computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
5–4
# of Screws Removed
4
6
4
1
4
2
4
4
18
2
2
0
0
4 loosened
1 loosened
3
2
2
Maintenance and Service Guide