Sharp LC-26SB25S Operation Manual page 25

tV menu
installation update
installation update has similar function with
automatic installation� The difference is you could
update channel list without erasing the original
information�
1�
menu on the remote control and select
Press
installation > Channel installation > installation
update.
2�
Press ≥ to enter the installation update menu.
Start now is highlighted.
3�
oK.
Press
4�
Press the green button to start the update. This
may take a few minutes.
5�
When the update is complete, press the red
button to return to the Channel installation
menu.
6�
Press menu to exit.
manually install channels
This section describes how to search and store
analogue TV channels manually� If you want to search
and store digital channel, please kindly refer to Section Test
digital reception
Step 1 Select your system
note
• Skip to Step 2 Search and store new TV channels if your
system settings are correct�
1�
menu on the remote control and select
Press
installation > Channel installation > analogue:
manual installation.
2�
≥ to enter the System list.
Press
TV Menu I Installation
Channel installation
Automatic installation
Installation update
Digital: Test reception
Analog: Manual installation
Rearrange
Clear program list
3�
Press < or > to select your country or region.
4�
Press ≤ to return to the Channel installation
menu.
Analog: Manual installation
System
Search
Fine tune
Store current channel
Step 2 Search and store new tV channels
1�
Press menu on the remote control and select
installation > Channel installation > analogue:
manual installation > Search.
2�
Press ≥ to enter the Search menu.
3�
Press the red button and the number buttons
on the remote control to enter the three digit
frequency. Alternatively, press the green button
to automatically search for the next channel.
4�
Press ≤ when the new channel is found.
5�
Select Store as new channel, and press ≥ to
enter.
6�
Press oK to save this channel.
7�
The channel number will be shown on the screen.
8�
Press menu to exit.
23