HP Compaq Presario,Presario F500 Maintenance And Service Manual page 54

Remove the eight Phillips PM2.5×7.0 screws that secure the display bezel to the display assembly.
6.
NOTE:
Display Screw Kit, spare part number 431400-001.
Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display
7.
bezel until the bezel disengages from the display enclosure.
Remove the display bezel (3).
8.
NOTE:
If it is necessary to replace the display inverter, release the inverter (1) from the display enclosure
9.
as far as the display panel cable and backlight cable will allow.
46 Chapter 4 Removal and replacement procedures
All screws used to secure display assembly internal subcomponents are available in the
The display bezel is available using spare part number 453525-001.