Table of Contents
Advertisement
Before Operation
LOCK (Parental Control)
LOCK
Rating
Password
Area Code
Rating
DVD
Some movies contain scenes that may not be suitable
for children to view. Many of these discs contain parental
control information that applies to the complete disc or to
certain scenes on the disc. Movies and scenes are rated
from 1 to 8, depending on the country. Some discs offer
more suitable scenes as an alternative.
The parental control feature allows you to block access
to scenes below the rating you input, thereby preventing
your children from being able to view material you
believe is unsuitable.
1
Select "Rating" on the LOCK menu then press
.
2 2
To access the Rating, Password and Area Code
features, you must input the 4-digit security
code you created.
If you have not yet entered a security code you are
prompted to do so.
Input a 4-digit code and press SELECT/ENTER.
Enter it again and press SELECT/ENTER to verify.
If you make a mistake before pressing
SELECT/ENTER, press CLEAR.
3 3
Select a rating from 1 to 8 using the
buttons.
Rating 1-8: Rating one (1) has the most restrictions
and rating eight (8) is the least restrictive.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
ote
If you set a rating for the player, all disc scenes with
the same rating or lower are played. Higher rated
scenes are not played unless an alternate scene is
available on the disc. The alternative must have the
same rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit pass-
word or change the rating level in order to play the disc.
4
Press SELECT/ENTER to confirm your rating
selection, then press SETUP to exit the menu.
14
Password (Security Code)
You can enter or change password.
1 Select Password on the LOCK menu then press
Unlock
2 Follow step 2 as shown left (Rating). "Change" or
****
RU
RU
3 Enter the new 4-digit code, then press
4 Press SETUP to exit the menu.
Move
Select
If you forget y
If you forget your security code you can clear it using
the following steps:
1 Select Password on the LOCK menu.
2 Input the 6-digit number "210499" on the setup menu
3 Enter a new code as described above.
When "
press STOP (x) and then press SETUP to move to the
setup menu.
Area Code
Enter the code of the country/area whose standards
were used to rate the DVD video disc, based on the list
in the reference chapter.
1
2 2
3 3
/
4
5
"New" is highlighted.
SELECT/ENTER. Input it again to verify.
our Security Code
and the security code is cleared.
ote
" appears on the TV screen,
INPUT PASSWD
DVD
Select "Area Code" on the LOCK menu then
press
.
Follow step 2 as shown left (Rating).
Select the first character using
Shift the cursor using
button and select the
second character using
To complete the area code selection, press
SELECT/ENTER.
.
/
buttons.
/
buttons.
Advertisement
Table of Contents
