Using System Restore Points; When To Create Restore Points; Create A System Restore Point; Restore To A Previous Date And Time - HP Compaq Presario,Presario C500 User Manual

Using system restore points

When you back up your system, you are creating a system restore point. A system restore point allows
you to save and name a snapshot of your hard drive at a specific point in time. You can then recover
back to that point if you want to reverse subsequent changes made to your system.
NOTE
since the last restore point.
You also can create additional restore points to provide increased protection for your system files and
settings.

When to create restore points

●
Before you add or extensively modify software or hardware.
●
Periodically, whenever the system is performing optimally.
NOTE
restoration.

Create a system restore point

1. Select Start > Control Panel > System and Maintenance > System.
2. In the left pane, click System protection.
3. Click the System Protection tab.
4. Under Automatic restore points, select the disk for which you want to create a restore point.
5. Click Create.
The System Protection window opens.
6. Follow the on-screen instructions.

Restore to a previous date and time

To revert to a restore point (created at a previous date and time), when the computer was functioning
optimally, follow these steps:
1. Select Start > Control Panel > System and Maintenance > System.
2. In the left pane, click System protection.
3. Click the System Protection tab.
4. Click the System Restore button, and then click Next.
The System Restore window opens.
5. Follow the on-screen instructions.
ENWW
Recovering to an earlier restore point does not affect data files saved or e-mails created
If you revert to a restore point and then change your mind, you can reverse the
Using system restore points 7