This section covers:
•
Connecting the CD or
DVD Drive
•
Inserting a Disc
•
Removing a Disc
•
Manually Ejecting
a Disc
Warning
Do not Disconnect the CD or
DVD drive when your
Notebook is turned on.
To connect the CD or DVD drive to your Notebook, complete
the following steps:
1. Turn off your Notebook.
2. Connect the cable of the CD or DVD drive to the CD or DVD
drive port on the left side of your Notebook.
3. Turn on your Notebook.
To load a disc into the disc drive, complete the following steps:
1. Press the Eject button located on the front of the drive.
2. Remove a disc from its protective case, holding the disc by its
center hole and outer edge to avoid touching the surface.