HP Compaq Presario,Presario 1900-XL164 Using

Hp compaq presario,presario 1900-xl164: supplementary guide

Hide thumbs Also See for Compaq Presario,Presario 1900-XL164:

Download this manual See also: Troubleshooting Manual, Maintenance and Service Manual

Using the Wedge

Attaching the Wedge to Your Computer

To attach the Wedge to your computer, complete the following steps:

1. Line up your computer with the alignment hooks on the Wedge.

2. Pivot your computer down and press it firmly into place on the Wedge.

Your computer will snap into place.

Attaching the Wedge

Table of Contents

Page 1: Attaching The Wedge To Your Computer
Using the Wedge Attaching the Wedge to Your Computer To attach the Wedge to your computer, complete the following steps: 1. Line up your computer with the alignment hooks on the Wedge. 2. Pivot your computer down and press it firmly into place on the Wedge. Your computer will snap into place.
Page 2: Detaching The Wedge From Your Computer
Detaching the Wedge from Your Computer Before detaching the Wedge from your computer, you must first shut down the computer, using one of the following methods: Turn off the computer using the standard Windows shutdown method. ¹ Press the Power button to initiate Hibernation mode.
Page 3: Inserting The Battery
Inserting the Battery To insert the battery, complete the following steps: 1. If the AC adapter is not connected, turn off your computer. 2. Close the computer cover. 3. Slide the battery label side up into the compartment until you hear a click. Inserting the Battery Removing the Battery To remove the battery, complete the following steps:...
Page 4 NOTICE The information in this card is subject to change without notice. COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. This card contains information protected by copyright.