Table of Contents
Advertisement
2. In a single motion touch and slide the Bluetooth slider
OFF
The slider color indicates the activation status. When active,
To turn Bluetooth off:
1. Press
2. In a single motion touch and slide the Bluetooth slider
Note: Bluetooth must be enabled prior to use.
Activating the Device Name
1. Press
2. Verify Bluetooth is active (indicated by
3. Press
name displays.
4. Tap
name for this device using the keyboard.
5. Tap Rename to confirm your setting.
Activating Visibility
1. Press
2. Verify your Bluetooth is active.
Internal Use Only
3. From the top of the Bluetooth settings page, toggle the state of
the visibility check mark by tapping Not visible to other
Bluetooth devices. Activating this feature enables your device
visibility and allows other devices to pair and communicate.
210
to the right to turn it on
displays in the Status area.
ON
to the left to turn it off
and tap the Rename phone. The assigned device
to erase the current device name and enter a new
DRAFT
and then tap System settings.
and then tap System settings
and then tap System settings
ON
.
OFF
.
ON
).
Bluetooth.
Bluetooth.
Advertisement
Table of Contents
