To Connect A Tv To Your Notebook (Select Models Only); To Connect An Infrared Device (Select Models Only) - HP Compaq NX9020 Startup Manual

Basic Operation
To Connect a TV to Your Notebook
(Select Models Only)
You can use a TV as an external monitor for your notebook. To
connect a TV to your notebook:
1. Plug a standard 4-pin S-Video cable to the S-Video out jack
on your notebook (yellow connector on the back panel). Plug
the other end of the cable to the S-Video in jack on your
television.
✎
2. Select Start > Control Panel > Appearance and Themes >
Display. Then, select Settings tab > Advanced button >
Display tab.
3. To enable the TV, select the red button next to TV.
✎
4. Select Apply to accept the changes.
5. If you are prompted to restart Windows, select Yes.
To Connect an Infrared Device
(Select Models Only)
✎
Select models include an infrared port. By default, the infrared
port is enabled, so you must first enable it before you can use it.
If your model has an infrared port (a small, rectangular lens
located on the front of the notebook), then your notebook can
communicate wirelessly with other infrared devices, such as
printers or other notebooks, using this port.
2–8
Although your notebook has a 7-pin S-Video out jack, the
notebook accepts either a 7-pin or 4-pin cable connection.
If the S-Video cable is not plugged into your notebook and TV,
the red button will not be displayed.
Startup Guide