Table of Contents
Advertisement
Installation
To install the monitor on your host system, please follow the steps below:
Steps
1 Connect the digital cable
a DVI Cable (Optional, only Dual-Input Model)
(1) Make sure both the monitor and computer are powered-OFF.
(2) Connect the DVI (Dual Link) cable to the computer.
b HDMI Cable (Optional, only HDMI-Input Model)
(1) Make sure both the monitor and computer are powered-OFF.
(2) Connect the HDMI cable to the computer.
c DP Cable (Optional, only DP-Input Model)
(1) Make sure both the monitor and computer are powered-OFF.
(2) Connect the DP cable to the computer.
d Mini DP cable (Optional, only Mini DP-Input model)
(1) Make sure both the monitor and computer are powered-OFF
(2) Connect the Mini DP cable to the computer
f Connect the audio cable (Optional, only Audio-input Model).
2 Connect the adapter
a Connect the AC cord to the adapter.
b Connect one end of the adapter to the monitor and the other end to a properly
grounded, AC outlet.
3 Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is very important.
4 If the monitor does not function properly, please refer to the troubleshooting section
to diagnose the problem.
Note: Audio output is only for audio output model.
In order to prevent damage to the monitor, do not lift the monitor by its base.
HDM I
HDM I
DVI-IN
HDMI
DP
Mini-DP
AUDIO IN
DVI-IN
HDMI
DP
Mini-DP
DC IN
7
Advertisement
Table of Contents
