Table of Contents
Advertisement
Operating Instructions
Operating Instructions
(continued)
TIMER: DELAY STOP / START FEATURE
FIRST DO THIS:
PRESS
TIMER BUTTON
Note: For Delay Stop, the unit must be in the On position．
Note: For Delay Start, the unit must be in the Off position.
First, Press TIMER button, then adjust timer setting, tap or hold the UP arrow (
timer at 0.5 hour increments, up to 10 hours, then at 1 hour increments up to 24 hours. The control will count down the time
remaining until start (8, 7.5, 7, etc.). The Delay Start Operation automatically selects cooling with maximum Fan speed (if Cool,
Energy Saver, or Fan Only was the last mode selected) . The temperature maintained will be the same as previously set. To change
the set temperature, press "COOL" then Up or Down arrows until the desired temperature is indicated on the display. After 5
seconds, the control will automatically change the display back to the hours remaining until the unit will start/stop. Pressing the
unit On/Off button at any time will cancel the Delay Start/Stop function. The Delay Start/Stop Feature will work until the unit either
starts or stops. Once that happens the above steps have to be repeated again.
CHECK FILTER FEATURE, YOU WILL SEE:
Note: This feature is a reminder to clean the Air Filter (See
Care and Cleaning) for more efficient operation. The LED
(light) will illuminate after 250 hours of operation. To reset
after cleaning the filter, press the "Filter Reset" button and
the light will go off.
HEATING FEATURE:
DO THIS:
PRESS MODE BUTTON,
CHOOSE HEAT
2009 Electrolux Home Products, Inc.
8
THEN DO THIS:
PRESS
UP/DOWN BUTTONS
YOU WILL SEE HOW MUCH TIME IS CHOSEN:
) or the DOWN arrow (
PRESS FILTER
RESET BUTTON
YOU WILL SEE:
Note: This feature can be used with any combination of FAN
Speeds (115V models are exceptional. The default setting of fan
speed on 115V models can not be changed in heat mode.),
Timer, or Sleep Modes. When in the "Heat" mode,the fan will
run continuously while heat is needed. The temperature will
automatically be maintained anywhere between 55 °F(13 °C)
and 80 °F(27 °C) (The upper limit of temperature could reach
86°F(30 °C) on some of the 115V models.). When the room
set temperature is satisfied, the fan will cycle off and on to
circulate and sample the room air.
) to change delay
DO THIS:
All rights reserved.
Advertisement
Table of Contents
