Table of Contents
Advertisement
8
www.electrolux.com
3.2 Control knob
Symbol
4. DAILY USE
WARNING!
Refer to Safety chapters.
4.1 Burner overview
A. Flame spreader
B. Ignition candle
C. Thermocouple
4.2 Ignition of the burner
Always light the burner
before you put on the
cookware.
WARNING!
Do not light the burner when
the flame spreader is
removed.
Description
no gas supply / off posi‐
tion
Symbol
WARNING!
Be very careful when you
use open fire in the kitchen
environment. The
manufacturer declines any
responsibility in case of the
flame misuse.
1. Push the control knob down and turn
it counterclockwise to the maximum
A
gas supply position ( ).
2. Keep the control knob pushed for
equal or less than 10 seconds. This
lets the thermocouple warm up. If
not, the gas supply is interrupted.
B
3. Adjust the flame after it is regular.
If after some tries the burner
C
does not light, check if the
flame spreader is in correct
position.
WARNING!
Do not keep the control knob
pushed for more than 15
seconds. If the burner does
not light after 15 seconds,
release the control knob,
turn it into off position and try
to light the burner again after
minimum 1 minute.
Description
ignition position / maxi‐
mum gas supply
minimum gas supply
Advertisement
Table of Contents
